|
TakeOff 7ft10 Mini-mal Surfboard Package Deal
New Stock...Just in!
Take-Off Surfboards have been one of the major success stories of 2006. We sold literally 100's of these boards last summer, more than NSP and Bic put together actually. If you've not come across Take-Off Surfboards before, here's a little background... The Take-Off Surfboard brand was launched in the UK in June 2005 by CJB's Surf Co. of Cornwall. Although you may not be too familiar with their name you will certainly be familiar with many of their other brands or products. .. C-Skins Wetsuits, Bulldog Leashes and Soft Rax, Sexwax and Atunas to name just a few! Due to the relatively low numbers of boards produced (compared to NSP and Bic for instance) there are about 29 Take-Off Dealers across the UK. Visit www.takeoffsurfboards.co.uk for more info.
The boards themselves were developed and are built in the Far East. Technical development has been supplied by a leading Cornish Surfboard manufacturer with 30 years experience. The Take-Off Surfboards themselves are fully hand made from start to finish, they are not pop-outs. As is the norm with Epoxy construction, the core is made from EPS. There is a single wood stringer. The outer shell is fibreglass with epoxy resin. The epoxy resin is cured by "baking" the board in an oven. At this point the board still has no colour so it is then painted and glossed. It is this "paint on the outside" finish that leads people to assume that the boards are in some way moulded, which is not the case.
Take-Off Surfboards are very popular with first time buyers who are looking for a little more individuality and progression than might be found in the better known Entry-Level boards such as NSP and Bic. It is important to remember however that NSP and Bic are both pretty "idiot-proof" products whereas Take-Off, although very durable, does not suffer fools so gladly and will exhibit settling of the deck and other malaises typical of custom made surfboards. This is because a Take-Off is a custom made surfboard, albeit a stronger epoxy custom made surfboard! If you are looking for a "ding-proof" board then you should really buy an NSP or Bic but if you want individuality with performance in a robust construction at a reasonable cost, go for a Take-Off..
Here's the Official Take-Off Blurb..
Take-Off Surfboards are ideal for first time buyers, beginners, improvers and those who don't get to surf as often as they would like! The extra length, width and thickness give good stability and also makes them easier to paddle. Also good if you want a longer board for smaller waves or for longboarders moving down to a shorter board.
Take-Off Surfboards are built emphasizing quality, durability and value for money but they certainly don't overlook performance. Designed especially for the intermediate / recreational surfer, there's sure to be a board in the range to suit most people's needs. These boards are built to withstand the hard knocks of the recreational surfer. They have been designed to deliver maximum durability and performance in their design and construction.
Finally... here's the Package Deal...
Custom Epoxy Surfboard Length: 7'10"
Wide point: 22"
Thickness: 2 7/8
Modern Epoxy Construction
FCS Fins x3 with key included
Basecoat Wax Included... Sexwax or Mrs. Palmers Mighty Mounds
Top Coat Included... Mrs. Palmers Ultra Sticky or Sexwax Topcoat Included
Bulldog Leash with Twin Brass Swivels, Padded Ankle Strap, Secret Key Pocket and Lifetime Warranty
5mm Padded Board Bag.. Usually the one illustrated below in red or blue otherwise one of similar spec.
Contact us on 01271/890453 if you would like to upgrade to a 10mm Board Bag
Just Add Water...everything else you need is included.
Great Value All-Inclusive Deal
Here's some more photo's...
Bag also available in blue.
Bag, Leash, Wax all included
Fins and Fin Key all included
OTHER BOARD GRAPHICS OFTEN AVAILABLE.. PHONE 01271/890453 for graphics options.
    
|
Specials | My Account | 
Cart Contents | 
Checkout 
